Over time, different problems may be encountered with the internet connection. One of these problems is the CRC error.
The CRC (Cyclic Redundancy Check) value, which provides error control in data transmitted through modems, may deteriorate over time for various reasons.
Modem CRC error occurs when this value is corrupted. In this article, we will consider what the modem CRC error is, why it occurs and how it can be resolved.
What is CRC Value?
CRC stands for “Cyclic Redundancy Check” and is an error checking algorithm used to detect possible errors during data transmission. The CRC value is used to check the integrity of the transmitted data.
Essentially, a CRC value calculated by the sender is compared with the CRC value calculated by the receiver.
If these values are different from each other, it means that there is an error in the transmitted data.
This error checking mechanism is widely used to ensure secure transmission of data.
CRCs are used for error detection in multiple computer networking technologies such as Ethernet (both wired and wireless variants), Token Ring, Asynchronous Transfer Mode (ATM), and Frame Relay
. Ethernet frames have a 32-bit Frame Control Sequence (FCS) field to which a 32-bit CRC value is appended at the end of the frame (immediately after the frame’s payload).
What Causes Modem CRC Error?
Modem CRC error can be caused by various reasons. These errors are usually a result of communication error and can affect the stability of your internet connection.
Here are some of the reasons for modem CRC error:
- Power Outages:Sudden power outages or surges can cause modem CRC errors. Electrical problems can prevent the modem from working properly and cause errors in data transmission.
- Wiring Problems:A break, loose connection or damage to the connection cable between the modem and the computer or router may cause CRC errors. Such physical problems can prevent data from being transmitted correctly.
- Bad Links:Problems in the socket, splitter or other ports to which the modem is connected may cause CRC errors. Having solid connections is important for communication lines to work properly.
- Frequency Conflicts:The modem operates on a specific frequency and interference may occur with other electronic devices operating on the same frequency. This may result in increased CRC errors.
- Modem Malfunctions:Hardware problems or software errors in your modem can also cause CRC errors. It is important to check whether your modem is up to date.
- Intensive Electronic Device Use:Other devices working intensively on the same network can increase CRC errors. This problem may occur especially when there are many applications that require high bandwidth on the network.
Modem CRC error usually occurs as a combination of these factors. In order to identify and solve the source of the problem, it is necessary to apply a step-by-step solution process, taking into account the reasons mentioned above.
Modem CRC Error Solution
To deal with the Modem CRC error, you can follow the steps below:
- Restart the Modem:Turn off your modem, wait a few minutes and turn it on again. This simple step can fix CRC errors in most cases.
- Wiring Check:Check the connection cable between the modem and the computer or router. If there is a problem, replacing the cable or tightening the connection may solve the problem.
- Check Electrical Connections:Check the electrical outlet to which the modem is connected. A stable electrical supply can reduce CRC errors. Consider connecting your modem to a power supply protection device if necessary.
- Frequency Conflict Check:Check other electronic devices operating on the same frequency as your modem. These devices may conflict with the modem’s frequency, causing CRC errors. If possible, try to solve the problem by changing the frequencies.
- Check for Modem Updates:Check if your modem has firmware or software updates. Keeping your modem updated by checking for updates on the manufacturer’s official website can reduce performance problems.
- Manage Heavy Electronic Device Use:Check other devices working heavily on the same network. You can reduce CRC errors by managing these devices, especially in cases where applications that require high bandwidth are intense.
- Get Professional Help:If the above steps do not resolve the issue or CRC errors persist, it is important to contact technical support. There may be a malfunction in the modem or a more complex problem.
Each modem type has different features.
Therefore, it may also be helpful to check your modem’s user manual and examine the specific solutions the manufacturer recommends.
As resolutionnotes, we offer you resolutionnotesGigaFiber internet with our own infrastructure. You will experience quality internet experience with resolutionnotes GigaFiber, which has download and upload speeds of up to 1000 Mbps. Additionally, if you are not satisfied with your current internet speed, you can get information about switching from another operator to our page.